Internationaler Kongress zu Materialien für Mobilität

Transvalor wird an der NeMMo Konferenz 2022 teilnehmen, einem internationalen Kongress über neue Materialien für die Mobilität der Zukunft. Diese wissenschaftliche Konferenz, die von der SIA (französischer Verband der Automobilingenieure) und der SFIP (französischer Verband der Plasturgie-Ingenieure) organisiert wird, findet vom 6. bis 7. Juli in Nantes (Frankreich) statt.

NeMMo_2022

Die NeMMo bringt Experten aus der Automobil- und der Materialindustrie zusammen und ist eine großartige Gelegenheit, um über Innovationen bei der Herstellung von Leichtbauteilen, recycelten Materialien, Nachhaltigkeit, Kreislaufwirtschaft und E-Mobilität zu diskutieren. Meetings, Konferenzen und Ausstellungen ermöglichen den Teilnehmern, sich die Mobilität der Zukunft vorzustellen.

 

Konferenz zur parametrischen Optimierung im Induktionserwärmungsprozess

Unsere Marketing-Produktmanagerin Nadine El Kosseifi wird in Zusammenarbeit mit NTN-SNR eine Konferenz zu folgenden Themen abhalten:

Benefits of the Parametric Optimization in the Induction Heating process

The challenge of the automotive market engineers is to find innovative technical solutions to deal with the new challenges of electric vehicles.NTN uses the FORGE® software to simulate the induction hardening process used in manufacturing bearing rings. Recently innovative bearings have been designed and manufactured by NTN. Due to electric vehicles technical requirements, these new wheel bearings and transmissions need to be more compact to be installed in a limited space and at the same time to fully respect a high level of customer expectations. During manufacturing these new bearing rings, the induction hardening process ensures a high hardness on the ball-raceway contacts while maintaining sufficient ductility elsewhere, the difficulty resides in quantifing instantaneously the influence of the inductor geometry and the current on the heated affected zone. To overcome this difficulty, NTN takes benefits from FORGE® parametric optimization coupled with CAD software to reach a given microstructure in a specific zone of the part. After having found the best configuration, a sensitivity test is done around this configuration thanks to a design of experiments. The goal is to build a metamodel able to catch the effect of process deviation without running another simulation. Thanks to this metamodel, it is possible to quantify instantaneously the influence of the inductor geometry and current on the heat affected zone. Through this case, the parametric optimization module integrated in FORGE® software and the coupling between the electromagnetic, thermomechanical, and metallurgical phenomena needed to simulate the induction hardening process will be reviewed.

Unser Team zusammen mit Christine Corsini, Sales Manager, wird Sie am Messestand begrüßen, um Ihre Fragen zu beantworten.

Entdecken Sie unsere Möglichkeiten zur Induktionserwärmungssimulation

Mehr erfahren