Training

Level : Beginner to Expert

Open course : Yes

In-company course : No

In order to offer distance learning, many of our courses can currently be done by webinar (interactive online training). Contact our team to find out about training opportunities and to obtain a personalized quote.

 

Level : Intermediate to Expert

Open course : No

In-company course : Yes

You did not find the right course in our other trainings? Request a tailor-made training that will meet your demand for expertise in one or more specific areas.

 

Level : Beginner

Open course : No

In-company course : Yes

Discover the range of possibilities of the latest software in the Transvalor suite: SIMHEAT®. Key functionalities will be addressed such as aluminum treatments, induction heat treatments and surface treatments.

 

Level : Beginner

Open course : No

In-company course : Yes

Discover the different functionalities of the software, all the steps involved in setting up a laser welding case and how to analyze the main results.

 

Level : Beginner

Open course : No

In-company course : Yes

Discover and learn how to use DIGIMU®. You will work on different grain growth modeling and dynamic recrystallization techniques.

 

Level : Beginner

Open course : No

In-company course : Yes

Start the REM3D® experience and simulate your foam molding processes. This will give you a head start on understanding physical phenomena and thus aiming at better optimization of your current processes.

 

Level : Beginner

Open course : No

In-company course : Yes

This course will be your first approach to REM3D® software from the data setup, computation launch and result analysis. Key functions will be covered, such as the AAA remesh technique, managing the pressure cycle, the impact of heat regulation etc.

 

Level : Intermédiaire

Open course : Oui

In-company course : Oui

First you’ll discover the new items in the graphic interface. You then practice with different tutorials and carry out two cases for filling.

 

Level : Beginner

Open course : No

In-company course : Yes

You will learn how to configure, launch and analyze a project according to the foundry technique used. Then you’ll see some advanced features like auto-radiation and thermal cycling.

 

Level : Beginner

Open course : No

In-company course : Yes

You will learn the data setting (including the stage of construction of the casting machine), the launch of calculation and the analysis. Other key functions will be explained such as the identification of internal faults, the prediction of segregation, the consideration of TTT diagrams, etc.

 

Level : Débutant

Open course : No

In-company course : Yes

This course will be your first approach to THERCAST® software from data setup to launch of calculation and analysis. Other specialized notions will be explained such as failure criteria, the impact of heat exchanges, TTT diagrams, segregation, etc.

 

Level : Intermédiaire

Open course : Yes

In-company course : Yes

Based on industrial examples, this training will allow you to improve the design of your dies before manufacturing them! You will be able to assess wear, quantify their deformation and predict their premature failure.

 

Level : Intermediate

Open course : Yes

In-company course : Yes

Master the new graphical interface and assimilate the latest FORGE® functionalities: multi-project mode, sensor and marking techniques and the personalization of data 'stores'.

 

Level : Intermediate

Open course: Yes

In-company course : Yes

Make the most of all the new features of the NxT 2.0 version, both in terms of data setting and in terms of analysis of the solver results.

 

Level : Beginner

Open course : Yes

In-company course : Yes

This course will be your first approach to COLDFORM®  from data setup steps, procedure for launching computations and how to analyze the results. Key functions will be covered.

 

Level : Avancé

Open course : No

In-company course: Yes

Learn to introduce your own rheological models, friction laws or damage criteria, but also to code your own user routines.

 

Level : Advanced

Open course : Yes

In-company course : Yes

No more long and tedious experiment plans. Discover the solutions for the complete and flawless filling of a piece or the design of tools minimizing the constraints.  

 

Level : Advanced

Open course : Yes

In-company course : Yes

Master your induction heating processes optimizing the design of the inductor, current frequency, generator power, etc.

 

Level : Advanced

Open course : No

In-company course : Yes

Find out how to anticipate mechanical and metallurgical properties after heat treatment, final hardness and residual stresses and learn to simulate a complete sequence.

 

Level : Intermediate

Open course : Yes

In-company course : Yes

You will discover how to setup the data for circular radial, vertical and radial-axial rolling, from the creation of the ring to the configuration of the process while taking into account the real kinematics of the rolling process.

Level : Intermediate

Open course : No

In-company course : Yes

This training will teach you how to setup cases for rolling with incremental approach as well as with the iterative stationary approach. You will also be able to identify centering type faults.

 

Level : Intermediate

Open course : Yes

In-company course : Yes

Based on industrial examples, this training will allow you to improve the design of your dies before manufacturing them! You will be able to assess wear, quantify their deformation and predict their premature failure.

 

Level : Intermediate

Open course : Yes

In-company course : Yes

Master the new graphical interface and assimilate the latest FORGE® functionalities: multi-project mode, sensor and marking techniques and the personalization of data 'store'.

 

Level : Intermediate

Open course : Yes

In-company course : Yes

You want to further increase your productivity. Develop the right reflexes to make the most of all the new functionalities of the FORGE® NxT 3.0 version!

Level : Beginner

Open course : Yes

In-company course : Yes

This course will be your first approach to FORGE®  from data setup steps, procedure for launching computations and how to analyze the results. Key functions will be covered.

Level : Beginner

Open course : Yes

In-company course : Yes

Perfect your use of the finite element method and understand how it is applied to solving large  deformation issues. This way you can improve the quality of your results with a better understanding of numerical aspects.