Transvalor Blog

Published on Sep 24, 2020

Take advantage of COLDFORM® to effectively model mechanical joining

COLDFORM® software allows to simulate mechanical joining processes such as clinching or riveting and predict mechanical properties of the final part.

Published on Sep 21, 2020

Simulate foundry filters with THERCAST®

Foundry filters can be taken into account in THERCAST® to improve the predictive nature of your casting simulations.

Published on Sep 16, 2020

Case study Tubacex - compare two manufacturing routes

Tubacex used FORGE® and THERCAST® to compare the quality of two manufacturing routes (forging or blooming) to produce round bars with a new ingot design.

Published on Sep 15, 2020

FORGE® for electrical upsetting

FORGE® software allows to simulate electrical upsetting and predict thermal, electrical, kinematics data, shape of the preform and more.

Published on Sep 11, 2020

Interoperability of TRANSWELD® with CAE software

Transvalor participates to the VMAP project to improve the interoperability of its software with other computation software, in particular for TRANSWELD®.

Published on Sep 10, 2020

MEDI'NOV Connection 2020

Transvalor took part in Medinov September 9-10 in Lyon France with a booth and a presentation on numerical simulation for medical devices manufacturing.

Published on Sep 9, 2020

Tech Day France 2020

Transvalor organized a Tech Day in Metz, France on 9 Sept. 2020 to present the benefits of its solutions for the forging and the casting industries.

Published on Sep 8, 2020

New release of DIGIMU® 4.0 for microstructural evolution simulation

A new version of DIGIMU®, software dedicated to the simulation of microstructural evolution, has been released by Transvalor.

Published on Sep 3, 2020

Cold Forming Days 2021

Transvalor participates in the 36th annual meeting of cold forming industries, organized from February 10 to 11, 2021 in Düsseldorf, Germany.

Published on Aug 27, 2020

Customer Story - LISI AEROSPACE

LISI Aerospace, designer and manufacturer of fasteners has been working with FORGE® software since 10 years to accelerate its development.

Published on Aug 17, 2020

Customer Story - GMH Gruppe

Georgsmarienhütte GmbH (GMH gruppe), leading supplier of steel bars uses THERCAST® software to optimize its casting processes.

Published on Aug 11, 2020

Forum Giesserei-Industrie 2020

At the German-speaking Forum Gießerei-Industrie on November 4th - 5th, 2020 in Würzburg, conferences of the foundry industry will provide new impulses out of the crisis.

Published on Aug 4, 2020

Customer Story - Alcorta Forging Group

Since a few years, Transvalor supports Alcorta Forging Group in the research of innovative solutions.

Published on Jul 31, 2020

French Job offer: Junior Network System Administrator

Transvalor is looking for a Junior Network System Administrator.

Published on Jul 30, 2020

Heat Treatment Congress Spain 2020

Transvalor takes part in the Heat Treatment Congress, a day dedicated to heat treatment applications held in Bilbao (Spain) on November 17, 2020.

Published on Jul 23, 2020

Customer Story - Faurecia Automotive Seating

Faurecia, manufacturer of automotive seat mechanisms, uses our FORGE® and TRANSWELD® software to ensure the safety of automobilists.

Published on Jul 16, 2020

Customer Story - NTN-SNR

NTN SNR, manufacturer of mecanical bearings for the automotive and aerospace industry, use the software FORGE® to optimize its processes.

Published on Jul 9, 2020

Ergonomic features of the new FORGE® interface

Discover the new features of the FORGE® user interface: context menu, Drag & Drop function, customizable keyboard shortcuts, etc.

Published on Jul 6, 2020

New functionnalities of the version FORGE® NxT 3.1

This new version FORGE® NxT 3.1 brings many new features in ergonomics and still enables your to work more efficiently.

Published on Jul 6, 2020

Generate its own user routines in FORGE®

FORGE® simulation software allows to code your own behavior, damage, fatigue or friction laws and many others.

Published on Jul 2, 2020

Transvalor joins the AFRC as the first Tier One Partner

Transvalor becomes Tier One Partner of the AFRC and brings simulation solutions to the FutureForge facility, to strengthen projects on metal forming.

Published on Jul 1, 2020

Customer Story - Leiber Group

Leiber Group, specialist in light aluminum components, has chosen FORGE® simulation software to improve its industrial processes.

Published on Jun 17, 2020

Customer Story - TU Dortmund

The IUL TU Dortmund uses FORGE® software to develop its research in adiabatic blanking, hot shear cutting and hot sheet forming.

Published on Jun 17, 2020

Tech Days - Webinars to improve process simulation

Transvalor & AFRC organize a series of free webinars for the manufacturing industry on June 17-18, 2020. They are open to any english-speaking participant.

Published on Jun 16, 2020

French Job offer: Technical Support Engineer

Transvalor is looking for a Technical Support Engineer.

Published on Jun 8, 2020

Customer Story - Advanced Forming Research Centre (AFRC)

The Advanced Forming Research Centre use FORGE® and DIGIMU® to support them in the microstructural modeling.

Published on Jun 2, 2020

Improvement of the damage-to-fracture transition model

A new modeling method for damage-to-fracture has been introduced into FORGE® and COLDFORM® software.

Published on May 5, 2020

Mastering open mold chemical foaming with REM3D®

REM3D®, simulation software for plastic injection processes, integrates models dedicated to open mold foaming.

Published on May 5, 2020

Simulate the laser welding process with TRANSWELD®

TRANSWELD® simulation software integrates models dedicated to welding without added material, including laser welding.

Published on May 4, 2020

Quaker Houghton: new strategic and technological partner

Transvalor and Quaker Houghton have formalized their strategic and technological partnership solidifying several joint actions initiated almost 3 years ago.

Published on Apr 23, 2020

Improvement of the induction model for heat treatments

A doctoral student works with our Scientific Development team on the induction model and more particularly on the adaptation of the meshing.

Published on Apr 20, 2020

New computation method for continuous casting

A new 'global slice computation' method has been developed in THERCATS® for continuous casting. This functionality allows to drastically reduce computation time.

Published on Apr 16, 2020

New functionalities in THERCAST® NxT 2.0

Discover the new features of THERCAST®, software for simulating foundry applications, ingot casting and continuous casting.

Published on Apr 7, 2020

New version of THERCAST® NxT 2.0 for the foundry sector

A new release of our simulation software dedicated to the foundry sector is now available.

Published on Mar 20, 2020

Joining in Car Body Engineering 2020 - virtual conference

Transvalor recorded an on-demand video for the online conference Joining in Car Body Engineering held on September 29 to October 1st, 2020.

Published on Mar 19, 2020

EPHJ 2020 - Fine Watchmaking Exhibition - cancelled

Transvalor takes part in the EPHJ 2020 trade show for watchmaking, September 15-18 in Geneva, Switzerland.

Published on Mar 18, 2020

Covid-19 information

Important informtaion : we remain operational during the Coronavirus crisis.

Published on Mar 18, 2020

ECHT 2020 - European Conference on Heat Treatment

Transvalor is attending ECHT 2020, conference on heat trea.tment, hold from 30 of November to 02 of December in Antwerp (Belgium).

Published on Mar 17, 2020

ECCC 2020 - Continuous Casting Conference - Canceled

Transvalor will be attending the ECCC 2020, the European Conference on Continuous Casting held in Bari, Italy from 21 until 23 October 2020.

Published on Mar 17, 2020

EVENT POSTPONED - Colloquium on Metal Forming 2020

POSTPONED EVENT - Transvalor takes part in the Colloquium on Metal Forming organized by the Chair of Metal Forming, 21 to 25 March in Zauchensee, Austria.

Published on Mar 14, 2020

CANCELED - Colloquium SFIP Polymer Materials

Transvalor was planned to participate in the colloquium on Polymer Materials in the field of Sport and Leisure. This event will take place in 2021.

Published on Mar 11, 2020

Tech Day Spain 2020

Transvalor organized a Spanish Tech Day to introduce its users to the latest FORGE® and THERCAST® functionalities, as well as the trends in the forge and foundry market.

Published on Feb 17, 2020

Our professional associations partners

Since its creation, Transvalor has relied on a network of professional association partners for the greatest benefit of its products and services.

Published on Feb 1, 2020

Legal Disclaimer

Here you will find information about the legal notices of Transvalor.

Published on Jan 31, 2020

GDR Recrystallization Workshop

Transvalor will be taking part in the recrystallization and grain growth Workshop organized at Les Houches, France, from 27 to 31 January 2020.

Published on Jan 20, 2020

French Job Offer: Distribution Network Manager Asia, Eastern Europe

Transvalor is looking for a Distribution Network Manager Asia, Eastern Europe.

Published on Jan 16, 2020

EUROGUSS 2020 - International Trade Fair for Die Casting

Transvalor participated in EUROGUSS 2020, the international International Trade Fair for Die Casting, from January 14 to 16 in Nuremberg, Germany.

Published on Jan 15, 2020

Guarantee quality manufacturing and at the best price

How can the simulation help the fabrication of high quality components all by ensuring control of production costs?

Published on Jan 15, 2020

Conquer new markets

How can the situation help conquer markets and contribute to the growth of your activity? Let’s discover a few concrete examples from customer experiences

Published on Jan 15, 2020

Gain competitiveness and improve my ROI

How to be more competitive on the industrial scene? Let’s discover a series of concrete examples from customer experiences.

Published on Jan 15, 2020

Our strategic and technological partners

Transvalor relies on a network of technology partners to incorporate the latest innovations in its products and services.

Published on Dec 10, 2019

Improvement of radiation calculation

Radiation results are more accurate in THERCAST® software thanks to recent improvements.

Published on Nov 29, 2019

New model for polyurethane foams behavior

Un nouveau modèle a été développé dans notre logiciel REM3D® pour améliorer la modélisation du comportement des mousses polyuréthanes.

Published on Nov 27, 2019

Polymer Foam 2019

Transvalor took part in Polymer Foam 2019, from 26 to 27 November in Germany.

Published on Nov 7, 2019

Datadvance User Conference 2019

Transvalor was sponsor of Datadvance User Conference, Nov. 6-7, at CentraleSupelec, Paris area, France.

Published on Oct 17, 2019

TISD 2019 - Transvalor International Simulation Days

The Transvalor International Simulation Days 2019 was for industrial and academic world interested in the simulation of material forming processes.

Published on Oct 15, 2019

Testimonials FORGE®

See what our clients have to say about FORGE® software.

Published on Sep 19, 2019

ICFG 2019

Transvalor participated in ICFG 2019 from September 15th to 19th in Spain.

Published on Sep 17, 2019

Case study Dextra

Dextra Group used FORGE® to validate the cold swaging process of the Griptec®, rebar splicing system.

Published on Aug 15, 2019

STEELSIM 2019

Transvalor took part in STEELSIM, an international conference focused on the modeling and simulation of metallurgical processes, in Toronto (Canada)

Published on Aug 1, 2019

New customer portal

A brand new customer portal is now available.

Published on Aug 1, 2019

THERCAST® - Precision above all

Avoid surprises by modeling your casting process with unprecedented accuracy

Published on Jul 15, 2019

THERCAST® - Capabilities

Master the complex relationships between metal, molds and all other elements of your casting process

Published on Jul 15, 2019

THERCAST® performance and scalability

Run simulations faster and more accurately, and run more of them

Published on Jul 10, 2019

THERCAST® - Proven real-world accuracy

Benefit from the unmatched capabilities of THERCAST®

Published on Jun 30, 2019

THERCAST® - Easy setup and exploration

Easily model an existing casting process, or one you’re planning or imagining

Published on Jun 30, 2019

THERCAST® - Deployment

Set up, schedule, run and manage simulations with ease

Published on Jun 21, 2019

EPHJ 2019 - Fine Watchmaking exhibition

Transvalor participated to EPHJ June 18th-21th, 2019 in Palexpo Geneva, Switzerland.

Published on Jun 20, 2019

THERCAST® - Start-to-finish simulation

Simulate your casting process from A to Z, without additional software tools and optimize the manufacturing process chain from casting to forming.

Published on Jun 10, 2019

Testimonials THERCAST®

See what our clients have to say about THERCAST® software.

Published on Jun 7, 2019

ECHT 2019 – European Conference on Heat Treatment

June 5-7, 2019 Transvalor participated in the ECHT (European Conference on Heat Treatment) in Bardolino (Italy).

Published on Jun 3, 2019

Layout of Highly Stressed Injection and Motor Components

The companies Hirschvogel Automotive Group, Engineering Center Steyr and Transvalor have published an article in the journal ATZoffhighway.

Published on May 17, 2019

Case study Ascometal

Ascometal used THERCAST® to validate the dimensioning of a new ingot.

Published on May 16, 2019

THERCAST® for investment casting

The software THERCAST® allows to simulate the foundry processes such as investment casting.

Published on May 16, 2019

THERCAST® for tilt casting

The software THERCAST® allows to simulate the foundry processes such as tilt casting.

Published on May 16, 2019

THERCAST® for centrifugal casting

THERCAST® simulation software allows to simulate centrifugal casting process taking into account the filling and the solidification phases.

Published on May 16, 2019

THERCAST® for low-pressure die casting

The software THERCAST® allows to simulate the foundry processes such as low pressure die casting.

Published on May 16, 2019

THERCAST® for shell mold gravity casting

The software THERCAST® allows to simulate the foundry processes such as shell mold gravity casting.

Published on May 16, 2019

THERCAST® for sand casting

The software THERCAST® allows to simulate the foundry processes such as sand casting.

Published on May 15, 2019

NEMU 2019

Transvalor participated to The International Conference NEMU in Stuttgart from 14th to 15th May 2019.

Published on May 15, 2019

How to get to Transvalor?

You are visiting us for a training or any other meeting? Follow our access instructions.

Published on May 15, 2019

THERCAST® for high-pressure die casting

The software THERCAST® allows to simulate the foundry processes such as high-pressure die casting.

Published on May 10, 2019

Testimonials highlighting our Customer Support & Training

Read our testimonials to see what our clients have to say about our Customer Support and our trainings

Published on May 10, 2019

ESAFORM 2019

Three of our developers held presentations about material forming simulation at ESAFORM 2019, from 08th to 10th May of 2019 in Vitoria-Gasteiz (Spain).

Published on Apr 12, 2019

3D numerical modeling of ductile fracture

Research program in association with CEMEF: 3D numerical modeling of ductile fracture.

Published on Apr 4, 2019

SIA 2019 - International Conference and Exhibition on Numerical Simulation

Transvalor attended at the conference about Numerical Simulation organized by the SIA held on 03-04 April, 2019, St-Quentin en Yvelines, France

Published on Mar 29, 2019

Development of the multidirectional forging process with FORGE®

The Revue Forge & Fonderie published an article about a multidirectional forging studies done by Cetim and IPH. The work has been carried out with FORGE®.

Published on Mar 25, 2019

Testimonials COLDFORM®

See what our clients have to say about COLDFORM® software.

Published on Mar 23, 2019

Case study Felb

Felb Srl used FORGE® to realize a new shaped ring rolling process.

Published on Mar 22, 2019

User Meeting FORGE® Turkey 2019

Transvalor organized its first FORGE® User Meeting from March 19 to 21, 2019 in Istanbul, Turkey.

Published on Mar 12, 2019

FORGE® NxT 3.0 is released

Discover the new functionalities of FORGE® NxT 3.0.

Published on Mar 11, 2019

New address: Transvalor is moving

Transvalor is moving to a new address in Sophia Antipolis.

Published on Feb 5, 2019

Download our software and Transvalor logos

Download our official logos in different formats to use them on your communication media.

Published on Feb 1, 2019

Personal Data

Data Protection Policy (GDPR) of the Transvalor website.

Published on Jan 31, 2019

Case study NTN-SNR Roulements

NTN-SNR Roulements used FORGE® to simulate its induction hardening process.

Published on Jan 24, 2019

Optimize the electrical resistance spot welding process

How to optimize the electrical resistance spot welding process in the automotive industry.

Published on Jan 22, 2019

Case study ABS Metallurgical Center

ABS used THERCAST® to simulate the soft reduction in continuous casting process.

Published on Jan 21, 2019

TEI has chosen FORGE® to simulate its hot forging process

The Turkish company TUSAS Engine Industries Inc. (TEI) has integrated FORGE® to simulate complex manufacturing processes.

Published on Jan 20, 2019

Improving the ingot quality

Improving the ingot quality by understanding the behavior of the mold flux during casting processes using 3D fluid/structure numerical simulation model.

Published on Jan 10, 2019

Case study Boucledor

Boucledor used COLDFORM® to simulate the complete sequence of its stamping process.

Published on Dec 1, 2018

Cookie Management

This article gives you information about the cookie management of the Transvalor website

Published on Nov 15, 2018

Process simulation for fastener manufacturing

Fastener + Fixing Magazine published an article about Transvalor and the benefits of manufacturing process simulation.

Published on Oct 20, 2018

Transvalor obtains ISO 9001 - 2015 version

Transvalor renews its ISO 9001 certification and gets the 2015 version.

Published on Aug 7, 2018

Leiber Group chooses FORGE® Simulation Software

LEIBER Group GmbH & Co. KG has introduced FORGE® simulation software.

Published on Aug 1, 2018

Testimonials REM3D®

See what our clients have to say about REM3D® software.

Published on Jul 1, 2018

Testimonials DIGIMU®

See what our clients have to say about DIGIMU® software.

Published on Jun 1, 2018

French research projects

Transvalor is naturally often implicated in research projects at the french national level, with numerous large-scale industrial participants.

Published on May 30, 2018

THERCAST® - FAQ

Answers to frequently asked questions about the software THERCAST®.

Published on May 15, 2018

An innovative method for producing balls from scrap rail head

The paper, written by Lublin University in Poland, describes an innovative technological solution for producing balls from scrap rail heads.

Published on May 4, 2018

CADdoctor TRANSVALOR Edition

The software CADdoctor TRANSVALOR Edition is an industry-proven application and designed specifically for Transvalor.

Published on May 1, 2018

THERCAST® for ingot casting

The software THERCAST® allows the simulation of ingot casting processes.

Published on May 1, 2018

THERCAST® for continuous casting

The software THERCAST® allows the simulation of continuous casting processes.

Published on May 1, 2018

FORGE® for open-die forging

FORGE® addresses major open-die forging processes: cogging, becking, mandrel drawing, blooming, etc. serving the energy industry and other industries.

Published on May 1, 2018

FORGE® for orbital forging

FORGE® simulates orbital forging and permits validation and optimization of forging sequences to improve forging yield and the parts’ quality.

Published on May 1, 2018

FORGE® for hydroforming

FORGE® allows to simulate hydroforming, a process dedicated to manufacturing thin products, plates or tubes.

Published on May 1, 2018

FORGE® for closed-die forging

FORGE® software simulates closed-die forging processes and provides a fast and accurate insight into forged components.

Published on May 1, 2018

FORGE® for superplastic forming

FORGE® addresses regular superplastic forming as well was superplastic forming combined with diffusion bonding.

Published on May 1, 2018

FORGE® for reducer rolling

Reducer rolling is used to produce preforms for components such as connecting rods or crankshafts.

Published on May 1, 2018

FORGE® for rolling processes

With FORGE®, it is possible to simulate the production of flat or long products.

Published on May 1, 2018

FORGE® for glass forming

FORGE® can simulate two processes of glass forming: blow-blow process and press-blow process.

Published on May 1, 2018

FORGE® for machining

The FORGE® software can be used to simulate machining.

Published on May 1, 2018

FORGE® for cross wedge rolling

FORGE® can simulate cross wedge rolling, a process used to produce preforms.

Published on May 1, 2018

FORGE® for sheet metal forming

FORGE® can simulate sheet metal forming, used for manufacturing thin products.

Published on May 1, 2018

FORGE® for heat treatment

FORGE® makes it possible to simulate heat treatment processes.

Published on May 1, 2018

FORGE® for thread rolling

FORGE® is the best simulation tool for the definition of the entire production of high technology screws, from forging up to thread rolling.

Published on May 1, 2018

FORGE® for bending processes

FORGE® allows the simulation of bending processes.

Published on May 1, 2018

FORGE® for trimming and fine blanking processes

Cutting processes occur at different stages of the workflow.

Published on May 1, 2018

FORGE® for fastening processes

FORGE® software makes it possible to simulate fastening processes.

Published on May 1, 2018

FORGE® for ring rolling

FORGE® allows to simulate ring rolling process.

Published on May 1, 2018

FORGE® for induction heating

FORGE® allows the simulation of induction heating

Published on May 1, 2018

THERCAST® for foundry casting

The software THERCAST® allows to simulate the foundry processes such as sand, shell, low and pressure casting, tilted casting, etc.

Published on Apr 27, 2018

Transvalor and Elysium to release CADdoctor TRANSVALOR Edition

Transvalor and Elysium to release CADdoctor TRANSVALOR Edition: Guarantee instant reuse of design data in CAE analysis.

Published on Jan 31, 2018

Physical modeling of polycrystalline evolutions

The microstructural state of a metallic material plays a major role.

Published on Jan 25, 2018

Improving cold forming processes using FEM simulation

The cold forging technique is a difficult process. It requires a good mastery of the process to give the expected output.

Published on Jan 20, 2018

Compaction in the shaping of semi-crystalline polymers

When crystallizing thermoplastics occurs a material shrinkage.

Published on Jan 15, 2018

Injection and foam molding

PU foams are widely used in several sectors. REM3D® software is used to finely simulate the injection and foam molding process.

Published on Jan 5, 2018

Prediction of grain size evolution during thermal treatments

Prediction of grain size evolution during thermal treatments at the mesoscopic scale: numerical improvements and industrial examples.

Published on Jan 5, 2018

Forming Process Simulation for Manufacturing Optimization

The grain size of the austenitic stainless steel is an important issue for parts such as primary pipes in nuclear power plants and more for metal forming.

Published on Oct 9, 2017

Benefits of simulation for heat treatment and microstructure prediction

This article aims at promoting process simulation in the forging industry by presenting the newest opportunities available.

Blog

New release of DIGIMU® 4.0 for microstructural evolution simulation

Customer Story - NTN-SNR

New functionnalities of the version FORGE® NxT 3.1

All the news

Be among the first to receive exclusive Transvalor news

Transvalor

Informations

Software

Services