Learn to use and master our software

Transvalor supports you in training your teams, cultivating your expertise and supporting your  technological changes, all of which comes down to enhanced competitivity! In in-company or open courses, our 24 trainings will meet your needs. And if you haven't found a course that answers your problem, ask for tailor-made training.

Download the catalog

Discover all our training courses

Webinar - Online courses

Level : Beginner to Expert

Open course : Yes

In-company course : No

In order to offer distance learning, many of our courses can currently be done by webinar (interactive online training). Contact our team to find out about training opportunities and to obtain a personalized quote.

 

Read more

Tailored Courses

Level : Intermediate to Expert

Open course : No

In-company course : Yes

You did not find the right course in our other trainings? Request a tailor-made training that will meet your demand for expertise in one or more specific areas.

 

Read more

Starting with SIMHEAT®

Level : Beginner

Open course : No

In-company course : Yes

Discover the range of possibilities of the latest software in the Transvalor suite: SIMHEAT®. Key functionalities will be addressed such as aluminum treatments, induction heat treatments and surface treatments.

 

Read more

Starting with TRANSWELD®

Level : Beginner

Open course : No

In-company course : Yes

Discover the different functionalities of the software, all the steps involved in setting up a laser welding case and how to analyze the main results.

 

Read more

Starting with DIGIMU®

Level : Beginner

Open course : No

In-company course : Yes

Discover and learn how to use DIGIMU®. You will work on different grain growth modeling and dynamic recrystallization techniques.

 

Read more

REM3D® - Foam molding

Level : Beginner

Open course : No

In-company course : Yes

Start the REM3D® experience and simulate your foam molding processes. This will give you a head start on understanding physical phenomena and thus aiming at better optimization of your current processes.

 

Read more

Starting with REM3D®

Level : Beginner

Open course : No

In-company course : Yes

This course will be your first approach to REM3D® software from the data setup, computation launch and result analysis. Key functions will be covered, such as the AAA remesh technique, managing the pressure cycle, the impact of heat regulation etc.

 

Read more

New functionalities of THERCAST® NxT 2.0

Level: Intermediate

Open course: Yes

In-company course: Yes

First you’ll discover the new items in the graphic interface. You then practice with different tutorials and carry out two cases for filling.

 

Read more

Starting with THERCAST® - Foundry processes

Level : Beginner

Open course : No

In-company course : Yes

You will learn how to configure, launch and analyze a project according to the foundry technique used. Then you’ll see some advanced features like auto-radiation and thermal cycling.

 

Read more

Starting with THERCAST® - Continuous casting

Level : Beginner

Open course : No

In-company course : Yes

You will learn the data setting (including the stage of construction of the casting machine), the launch of calculation and the analysis. Other key functions will be explained such as the identification of internal faults, the prediction of segregation, the consideration of TTT diagrams, etc.

 

Read more

Starting with THERCAST® - Ingot casting

Level: Beginner

Open course: No

In-company course: Yes

This course will be your first approach to THERCAST® software from data setup to launch of calculation and analysis. Other specialized notions will be explained such as failure criteria, the impact of heat exchanges, TTT diagrams, segregation, etc.

 

Read more

COLDFORM® - Die analysis

Level: Intermediate

Open course: Yes

In-company course: Yes

Based on industrial examples, this training will allow you to improve the design of your dies before manufacturing them! You will be able to assess wear, quantify their deformation and predict their premature failure.

 

Read more

COLDFORM® - Mastering the software

Level : Intermediate

Open course : Yes

In-company course : Yes

Master the new graphical interface and assimilate the latest FORGE® functionalities: multi-project mode, sensor and marking techniques and the personalization of data 'stores'.

 

Read more

New functionalities of COLDFORM® NxT 2.0

Level : Intermediate

Open course: Yes

In-company course : Yes
Make the most of all the new features of the NxT 2.0 version, both in terms of data setting and in terms of analysis of the solver results.

 

Read more

Starting with COLDFORM®

Level : Beginner

Open course : Yes

In-company course : Yes

This course will be your first approach to COLDFORM®  from data setup steps, procedure for launching computations and how to analyze the results. Key functions will be covered.

 

Read more

FORGE® - Developing your own user routines

Level : Advanced

Open course : No

In-company course: Yes
Learn to introduce your own rheological models, friction laws or damage criteria, but also to code your own user routines.

 

Read more

FORGE® - Automatic optimization

Level : Advanced

Open course : Yes

In-company course : Yes
No more long and tedious experiment plans. Discover the solutions for the complete and flawless filling of a piece or the design of tools minimizing the constraints.  

 

Read more

FORGE® - Induction forge heating and heat treating

Level : Advanced

Open course : Yes

In-company course : Yes
Master your induction heating processes optimizing the design of the inductor, current frequency, generator power, etc.

 

Read more

FORGE® - Heat treatment of steel and aluminum

Level : Advanced

Open course : No

In-company course : Yes

Find out how to anticipate mechanical and metallurgical properties after heat treatment, final hardness and residual stresses and learn to simulate a complete sequence.

 

Read more

FORGE® - Ring rolling

Level : Intermediate

Open course : Yes

In-company course : Yes

You will discover how to setup the data for circular radial, vertical and radial-axial rolling, from the creation of the ring to the configuration of the process while taking into account the real kinematics of the rolling process.

Read more

FORGE® - Rolling flat and long products

Level : Intermediate

Open course : No

In-company course : Yes

This training will teach you how to setup cases for rolling with incremental approach as well as with the iterative stationary approach. You will also be able to identify centering type faults.

 

Read more

FORGE® - Die analysis

Level : Intermediate

Open course : Yes

In-company course : Yes

Based on industrial examples, this training will allow you to improve the design of your dies before manufacturing them! You will be able to assess wear, quantify their deformation and predict their premature failure.

 

Read more

FORGE® - Mastering the software

Level : Intermediate

Open course : Yes

In-company course : Yes

Master the new graphical interface and assimilate the latest FORGE® functionalities: multi-project mode, sensor and marking techniques and the personalization of data 'store'.

 

Read more

New functionalities of FORGE® NxT 3.0

Level : Intermediate Open course : Yes In-company course : Yes

You want to further increase your productivity. Develop the right reflexes to make the most of all the new functionalities of the FORGE® NxT 3.0 version!

Read more

Starting with FORGE®

Level : Beginner Open course : Yes In-company course : Yes

This course will be your first approach to FORGE®  from data setup steps, procedure for launching computations and how to analyze the results. Key functions will be covered.

Read more

Finite element modeling fundamentals

Level : Beginner Open course : Yes In-company course : Yes

Perfect your use of the finite element method and understand how it is applied to solving large  deformation issues. This way you can improve the quality of your results with a better understanding of numerical aspects.

 

Read more


Why come to Transvalor for training?

 
Beginners or experts, industrial or university:
our training courses are the vectors of the adaptation
and the continuous optimization of your manufacturing projects.
35-and-d-experience

35 years of expertise

In material forming simulation

customer

Courses led by experts

In simulation, processes and materials science

iso-1

ISO 9001 certified 2015 version

Guaranteeing the quality of our teaching

levels

Tailored courses

Designed for your specific needs with your own geometries

Pass the Transvalor Qualification

Some of our training courses lead to qualification

Your benefits?

  • Show your certified ability to use Transvalor software professionally,
  • Prove your theoretical and hands-on expertise in numerical simulation,
  • Value your qualification certificate by enriching your resume or your profile on professional social media.

This option is charged 200€ excl. VAT per person.

Ask a quote
Qualification_FORGE

Qualification FORGE  

Qualification_THERCAST

Qualification THERCAST

Qualification_COLDFORM

Qualification COLDFORM  

 

They talk about us

logo_boucledor_

Boucledor S.A.

Excellent training, on many points: very well suited and “formatted” for our needs, technical training. Dynamic and enthusiastic trainer, with in-depth technical knowledge. All points requested upstream were covered and pertinent solutions were proposed.

Vincent Zak, Project Manager, Boucledor
logo_abs

ABS Centre Métallurgique

Highly satisfied with the THERCAST® training on continuous casting and ingot
casting. All of the keys were provided in order to be immediately operational and
correctly simulate these processes and their particularities. The training allowed us
to get a firm grip on the graphic interface, import data calculated on THERCAST®, calculate hot forming. The examples chosen were perfectly suited to our issues.

Benjamin ERZAR, R&D Engineer, ABS Centre Métallurgique
logo_Ugitech

Ugitech

Very flexible training that is adapted to the participants needs; great reactivity in
response to the questions that were raised.

Thomas SOURISSEAU, Simulation Engineer, Ugitech
Transvalor S.A. is approved as a Training Organization, registered with the Prefect of the Ile de France Region and the Department of Paris under the number 11061363575. For France, Transvalor is also referenced with the Datadock service in compliance with Decree No. 2015- 790 of June 30, 2015.