Transvalor Blog

Blog

Published on Feb 3, 2026

THERCAST® FOR THE PREDICTION OF MACROSEGREGATION IN BINARY ALLOYS

Learn how THERCAST® integrated the fundamental mechanisms of macrosegregation from the initial stages of its development, consistently aligning with established literature references.

Published on Feb 2, 2026

Testimonial: FORGE® and THERCAST® serving the aeronautic industry with Aubert et Duval

How FORGE® and THERCAST

Published on Jan 27, 2026

THERCAST® NxT 3.1: From simulation results to confident industrial decisions

Discover THERCAST® NxT 3.1: your simulation workflows become faster and more accurate with improved solver, predictive models, intuitive interface, and sustainable computing.

All the news

Published on Feb 3, 2026

THERCAST® FOR THE PREDICTION OF MACROSEGREGATION IN BINARY ALLOYS

Learn how THERCAST® integrated the fundamental mechanisms of macrosegregation from the initial stages of its development, consistently aligning with established literature references.

Published on Feb 2, 2026

Testimonial: FORGE® and THERCAST® serving the aeronautic industry with Aubert et Duval

How FORGE® and THERCAST

Published on Feb 2, 2026

Transvalor is attending the VDI 39th Annual Meeting of Cold Forming Specialists 2026

Transvalor will participate in the VDI 39th Annual Meeting of Cold Forming Specialists on February 11th and 12th, 2026, in Düsseldorf, Germany.

Published on Jan 27, 2026

THERCAST® NxT 3.1: From simulation results to confident industrial decisions

Discover THERCAST® NxT 3.1: your simulation workflows become faster and more accurate with improved solver, predictive models, intuitive interface, and sustainable computing.

Published on Jan 15, 2026

Transvalor Academics: A new portal for the academic community

Transvalor Academics is a portal designed for researchers and educators, offering access to Transvalor solutions, scientific publications, and academic resources.

Published on Dec 3, 2025

Balancing accuracy and efficiency in microstructural simulation models

This study compares the performance of different models for predicting microstructural evolution: a phenomenological JMAK-type model, a mean-field model, and DIGIMU®’s full-field model. The DynamiX tool integrated into FORGE®, when coupled with a mean-field “population” model, demonstrates rapid and reliable microstructural prediction in an industrial context.

Published on Dec 2, 2025

Testimonial: Renault Group highlights how the automotive industry leverages simulation with FORGE®

Discover how Renault experts are overcoming modern automotive production challenges with Transvalor’s FORGE® simulation software in this testimonial!

Published on Nov 20, 2025

Testimonial: Transvalor worked in collaboration with the Institute of Forming Technology and Machines on an advanced friction model

FORGE® uses friction models to accurately predict how materials behave and interact between contact surfaces, capturing the effects of sliding, pressure, and heat transfer during forming processes.

Published on Nov 10, 2025

Z-sim

Z-sim is a constitutive equation driver that enables users to simulate the behavior of a representative volume element (RVE) without relying on a full finite element model.

Published on Nov 10, 2025

Z-post

Z-post is a versatile post-processing tool designed to handle data from any finite element analysis (FEA). While it was originally created to process results from Zébulon, it has since evolved into a general-purpose application compatible with most major FEA codes.

Published on Nov 10, 2025

Z-opt

Z-opt is a flexible optimization package that can be coupled with virtually any external software through ASCII input/output files or other communication formats.

Published on Nov 10, 2025

Zébulon

Zébulon is the flagship finite element solver within the Z-set Suite, designed to tackle the full spectrum of problems in structural mechanics.

Published on Nov 10, 2025

Z-cracks

Z-cracks is a specialized module for 3D fracture mechanics analysis, enabling the study of stress intensity factors (SIFs) and the simulation of mixed-mode crack propagation.

Published on Nov 10, 2025

Z-MAT

Z-mat is a core component of the Z-set Suite, but it can also be used independently as a material library plugin with major finite element solvers such as Abaqus, Ansys, Samcef, LS-Dyna, and MSC Software.

Published on Nov 5, 2025

WEBINAR: THERCAST® NxT 3.1 – Digital intelligence at the heart of your metallurgical processes

Don't miss our upcoming webinar on THERCAST® new release!

Published on Oct 21, 2025

Recent Developments in THERCAST® software – Advanced Simulation for Metal Casting

Discover the latest updates in THERCAST®: improved inclusion and segregation models, CET integration, and electromagnetic stirring simulations for next-level metal casting optimization.

Published on Oct 21, 2025

FORGE®: High Performance Software for Metal Forming Processes

Discover how FORGE® can address your needs and challenges in today’s dynamic industrial landscape.

Published on Oct 8, 2025

MODELING OF THE NITRIDING PROCESS USING FORGE®

Discover how FORGE® simulation predicts nitrogen and carbon diffusion in nitrided 32CDV13 steel by accounting for thermodynamic equilibrium and the formation of nitrides and carbides. Considering precipitation effects refines the modeling of diffusion and distortion mechanisms, improving the control of thermochemical treatments for high-performance steels.

Published on Sep 30, 2025

Get ready to shape the future of manufacturing at the TISD 2026!

Mark your calendars: September 29 – October 1, 2026, as Transvalor brings back its flagship event: the TISD 2026 at the Palais des Congrès, Antibes – Juan-les-Pins, on the beautiful French Riviera.

Published on Sep 17, 2025

Testimonial: Camille Durand from ENSAM (Arts et Métiers)

Join Transvalor at IFC 2025 in Frankfurt, Oct 5–10. Discover our latest metal forming simulation solutions at Booth #37. Save the date!

Published on Sep 9, 2025

System Administrator Linux/Windows (M/F)

Transvalor is hiring an IT Manager (M/F)

Published on Sep 9, 2025

Job Offer IT Manager (M/F)

Transvalor is hiring an IT Manager (M/F)

Published on Sep 8, 2025

ESTAD 2025

Transvalor will participate in the upcoming ESTAD 2025 (European Steel Technology and Application Days), which will take place from October 6 to 9, 2025, in Verona, Italy.

Published on Sep 3, 2025

Transvalor Launches Tech Talks Series on THERCAST® & REM3D®: Tackling Casting & Foaming Challenges in September and October

Transvalor Tech Talks 2025: in September and October join us to explore casting thematics with live demos, industrial cases and interactive discussions...

Published on Sep 2, 2025

Steelsim 2025

Transvalor will be attending the Steelsim 2025, held in Trinec, Czech Republic, from September 2 to 4.

Published on Aug 27, 2025

International Forging Congress 2025

Join Transvalor at IFC 2025 in Frankfurt, Oct 5–10. Discover our latest metal forming simulation solutions at Booth #37. Save the date!

Published on Aug 11, 2025

Crack propagation modeling with Z-set

Leverage the Z-cracks module of the Z-set suite to predict crack initiation and propagation in your critical industrial components, thereby reducing the risk of unexpected failures.

Published on Jul 8, 2025

Towards AI-Augmented Engineering: what you missed at the Transvalor Tech Days!

You missed the Transvalor Tech Days? Catch up what our experts shared about our vision for augmented digital engineering—integrating Machine Learning (ML) and Artificial Intelligence (AI) into modeling and simulation workflows.

Published on Jul 8, 2025

Continuous Casting Machine Tool Optimization: A Step Closer to the Digital Twin

Transvalor recently hosted a live webinar titled “Continuous Casting Machine Tool Optimization: On the Way to the Digital Twin.”.

Published on Jun 30, 2025

The 21 Most Common Defects in the Metal Casting Process

Knowing the most common defects that appear during the metal casting process lets you know what to watch out for.

Published on Jun 30, 2025

Which Type of Metal Casting Is Right For You?

It's critical to choose the right type of metal casting to ensure better manufacturing outcomes.

Published on Jun 30, 2025

Common Defects Associated With Low Pressure Die Casting

Knowing what to look for will help you predict and prevent some of the most common defects associated with low-pressure die casting.

Published on Jun 30, 2025

What Is the Average Lead Time for Metal Mold Casting?

Reducing lead time for metal mold casting is key to getting your products out the door and into clients’ hands faster.

Published on Jun 30, 2025

The Difference Between Expendable & Reusable Molds in the Casting Process

Learn the difference between the two kinds of molds used in the casting process: expendable and reusable.

Published on Jun 30, 2025

Metal Casting Manufacturing: Tips to Decrease Your Time to Market

When integrating new technology into your metal casting manufacturing, look forward to the possibility of a shorter time to market.

Published on Jun 30, 2025

Tips for Reducing Spend Throughout the Casting Manufacturing Process

The efficacy of the casting manufacturing process has never been more critical, especially in such a highly competitive industry.

Published on Jun 30, 2025

What Causes Metal Warping?

Understanding the potential of metal warping during casting and eliminating it leads to better part quality and productivity.

Published on Jun 30, 2025

How Does High Pressure Die Casting Simulation Work?

Recognizing the intricacies of high-pressure die casting is essential for advancing casting processes and integrating simulation software.

Published on Jun 30, 2025

Here's Why You Need Sand Casting Simulation

THERCAST® is a sand casting simulation software that increases casting quality, cuts development costs, and speeds up production optimization.

Published on Jun 30, 2025

An Engineer's Guide to Gas Porosity & Shrinkage Defects

Transvalor Americas' 3D simulation software is the optimal solution for resolving gas porosity, shrinkage, and other casting problems.

Published on Jun 30, 2025

How Metal Casting Simulation Software Mitigates Manufacturing Defects

Learn how metal casting simulation software enables engineers to assess a metal casting before pouring any metal in order to reduce manufacturing problems.

Published on Jun 30, 2025

How to Predict These 5 Types of Pouring Metal Defects

Avoid pouring metal defects by making use of innovative metal casting simulation to predict how well a mold will perform before any metal is melted.

Published on Jun 30, 2025

How to Choose the Right Casting Flow Simulation Software

Casting flow simulation software helps manufacturing companies avoid added design headaches by reducing production costs and accelerating the delivery of innovative products.

Published on Jun 30, 2025

The Volatile Impact Of Metal Casting Defects on Profitability

Metal casting defects can seriously impact your bottom line. Find out how to avoid these costly mistakes by checking out our latest blog post.

Published on Jun 30, 2025

How to Prevent Slag Inclusion & Other Manufacturing Defects

Learn about the causes of slag inclusion and discover how to prevent them from happening during manufacturing.

Published on Jun 30, 2025

Best Casting Simulation Software for Manufacturers

Looking for the best casting simulation software? Look no further! Our software is designed to help manufacturers streamline their casting processes.

Published on Jun 30, 2025

3 Design Considerations for Your Next Auto Die Casting Project

When it comes to auto die casting projects, it's important to keep manufacturability in mind. Here are three tips to get you started.

Published on Jun 30, 2025

An Automotive Engineer's Guide to Die Casting Process Optimization

Learn how die casting process optimization can benefit automotive engineers.

Published on Jun 30, 2025

11 Die Casting Products That Are Disrupting the Automotive Industry

Die casting products are becoming more prevalent in the automotive industry as engineers strive to build better, lightweight, and efficient vehicles.

Published on Jun 30, 2025

How Casting Simulation Software Reduces Shrinkage Porosity In Auto Die Casting

Digital engineering for manufacturing can help reduce waste and per-piece manufacturing costs.

Published on Jun 30, 2025

Exploring the Benefits of Digital Engineering for Manufacturing

Digital engineering for manufacturing can help reduce waste and per-piece manufacturing costs.

Published on Jun 30, 2025

Maximizing Cost Savings Through Forging Process Optimization

The forging optimization process has never been easier with the help of this tool.

Published on Jun 30, 2025

Using Forging Software to Win Larger Contracts

Empowered by modern technology, manufacturers can leverage forging software to win larger contracts in new markets.

Published on Jun 30, 2025

Common Problems That Can Be Solved Using FORGE® Simulation Software

Engineers can use forging simulation software to optimize parameters well before any premature failures occur, saving time and money.

Published on Jun 30, 2025

Why simulating your heat treatment process is important?

Why simulation of heat treatment processes is critical for your business? Simulation provides better understanding and competitive advantages.

Published on Jun 30, 2025

How Casting Process Simulation Software Improves Manufacturing Efficiency

Take advantage of casting process simulation software to improve your plant's manufacturing efficiency.

Published on Jun 30, 2025

Why Should You Use Simulation Software For Your Molten Metal Casting?

It's easy to boost quality and yield while addressing issues with molten metal casting, like high scrap rates, process flux, and trial-and-error methods.

Published on Jun 30, 2025

Is Your Casting Mold Producing Defects?

Transitioning from a reactive to a proactive strategy for casting mold defect prevention is possible with a Lean culture and the latest simulation software.

Published on Jun 30, 2025

Signs Your Cast Molding Process Is Inefficient

Evaluating the productivity of the cast molding process can help close the gap between workflow inefficiencies and ideal input.

Published on Jun 30, 2025

9 Different Methods of Casting for More Effective Manufacturing

Learn about the different methods of casting, so you can decide which foundry process is best for your plant.

Published on Jun 30, 2025

How to simulate die progression for fasteners

Learn how simulation of cold forming of steel and other materials help you and your team. Discover all the tools available to increase quality.

Published on Jun 30, 2025

Persis Metallurgical Technologies LLC

Meet Mohsen. Mohsen has been very successful in his career. While he loved his work in previous companies and thrives on these great experiences, he has decided to go full force into building his own metallurgical consulting business. The combination of his passion for continuous learning, metallurgical engineering and helping small businesses, has driven him...

Published on Jun 30, 2025

FRISA a trusted steel supplier

FRISA, a long-time partner in technology has most likely what you need if you are looking for steel bars and billets. Check out their LinkedIn profile and website for more information.

Published on Jun 30, 2025

Closed Die Forging: Process, Advantages & Disadvantages

Learn how simulation software is shifting closed-die forging advantages and disadvantages.

Published on Jun 30, 2025

Partnership between TRANSVALOR SA and Scotland’s FutureForge Facility

Another great partnership for our customers, and the future of our products. Read More

Published on Jun 30, 2025

Mechanical Engineering Simulation: The Definitive Guide

Mechanical engineering simulation, while transformative, leaves many decision-makers with more questions than answers.

Published on Jun 30, 2025

5 Advantages of Digital Manufacturing for Automotive

An advantage of digital manufacturing is that it helps engineers balance external demands against production concerns by optimizing key internal functions.

Published on Jun 30, 2025

How to Optimize Your Centrifugal Casting Process

Optimizing your centrifugal casting process produces high-density, robust products without added cost or time-to-market.

Published on Jun 30, 2025

Viking Forge and Transvalor Americas Closed Die Forging

Explore the innovative techniques and technology used by Viking Forge in closed die forging, in partnership with Transvalor Amercias.

Published on May 27, 2025

DIGIMU® CONTINUES TO EVOLVE

Introducing the nucleus size distribution module in the latest DIGIMU® release! This advanced functionality enhances the precision of your microstructural predictions, delivering results that align even more closely with experimental observations.

Published on May 21, 2025

Don't Miss the Transvalor International Casting Forum 2025!

Join global steelmaking experts at the International Casting Forum 2025! Discover innovations in continuous and ingot casting, attend expert talks, and visit Tata Steel IJmuiden’s advanced facilities.

Published on May 21, 2025

WEBINAR: Continuous casting with THERCAST®

Don't miss our upcoming webinar on Continuous casting with THERCAST®

Published on May 14, 2025

EPHJ 2025 - THE PINNACLE EVENT FOR THE FINE WATCHMAKING INDUSTRY

Transvalor is participating in the EPHJ 2025 trade show for watchmaking from the 3rd - 6th of June in Geneva, Switzerland.

Published on Mar 31, 2025

Transvalor India participated in the AIFI event in Chennai on March 5, 2025

Transvalor attended the AIFI event in Chennai, India to showcase FORGE® and SIMHEAT® to the forging industry key actors

Published on Mar 25, 2025

Transvalor’s Contribution to the SHELL-CRACK Project

Transvalor is proud to be a key contributor to the SHELL-CRACK project, supporting SWERIM in revolutionizing continuous casting.

Published on Mar 24, 2025

Fastener Fair Global 2025

Join Transvalor at Fastener Fair Global 2025 in Stuttgart (March 25-27) to explore cutting-edge fastener innovations. Connect with industry leaders, discover FEM simulation solutions, and stay ahead in fastener manufacturing. Visit us to optimize your production!

Published on Mar 11, 2025

FORGE® NxT 4.1 is available

Discover the features of the new FORGE® NxT 4.1 release! This version offers a calculation archiving tool, an enhanced Python API, and numerous functionalities for preparing your simulations and analyzing results.

Published on Feb 24, 2025

Transvalor at the VDI Annual Meeting of Cold Forging Experts

Transvalor will be attending VDI Annual Meeting of Cold Forging Experts: Showcasing COLDFORM®

Published on Feb 7, 2025

Forging Industry Advocacy: Transvalor Americas Joins FIA Members in Washington, D.C.

Transvalor will be attending the FIA Lobby Day in Washington DC this month!

Published on Feb 3, 2025

CDRX & PRECIPITATES EVOLUTION MODELLING

Discover how DIGIMU® 5.0 revolutionizes microstructure simulations for thermomechanical processes. Dive into innovative features that improve accuracy in predicting microstructural behaviors, empowering you to enhance material properties outcomes.

Published on Jan 27, 2025

THERCAST® Roadmap – Pioneering the Future of Solidification and Manufacturing Simulation

Discover THERCAST®'s future roadmap: advanced Python API, electromagnetic solver, and fully chained solutions for nuclear, automotive, and aerospace industries.

Published on Jan 14, 2025

Transvalor Announces Tech Days 2025

Find out where Transvalor will be hosting Tech Days in 2025!

Published on Dec 4, 2024

Exploring oxidation kinetics using numerical solutions

Discover how FORGE® leverages cutting-edge research to simulate oxidation kinetics and predict oxide scale failures during hot forging. Explore advanced features designed to optimize material performance and reduce waste in high-temperature environments.

Published on Nov 5, 2024

WEBINAR: THERCAST® 3.0 NEW RELEASE

Don't miss our upcoming webinar on the new features of THERCAST® 3.0!

Published on Oct 22, 2024

An unforgettable meeting for manufacturers and researchers from all over the world

Relive the TISD 2024 at the Pullman Hotel, Cannes-Mandelieu, where global experts shared innovations in material forming simulation and sustainable tech.

Published on Oct 15, 2024

Physics-Informed Graph-Mesh Networks for PDEs: A hybrid approach for complex problems

Overcome the limits of Physics-Informed Neural Networks in solving complex PDEs with a hybrid approach combining GNNs and finite element methods.

Published on Jul 9, 2024

AIM National Conference

Join Transvalor at the 40th AIM National Conference in Naples from September 11-13, 2024. Discover the latest in metallurgy and materials science !

Published on Jun 17, 2024

RELEASE OF THERCAST® NxT 3.0: boosting the digitalization of industrial casting processes

Discover Transvalor's THERCAST® NxT 3.0, revolutionizing casting processes with advanced simulations, real-time tracking, optimization tools, and a powerful Python API for customization.

Published on May 17, 2024

Metal Forming 2024

Transvalor is participating in the 20th International Conference on Metal Forming 2024 from 15 to 18 September 2024 in Krakow, Poland.

Published on Apr 18, 2024

Microstructurally Graded Samples in 7xxx Alloys

Discover 7xxx Alloys' Graded Samples for Precise Characterization & Alloy Evolution Insights.

Published on Mar 26, 2024

ECCC 2024 - CONTINUOUS CASTING CONFERENCE

Transvalor will attend the European Conference on Continuous Casting from 7 to 10 October 2024 in Essen, Germany.

Published on Mar 26, 2024

Full Field Grain Size Prediction with DIGIMU® 5.0

Explore the power of DIGIMU® for precise predictions of grain size evolution in metal forming processes.

Published on Mar 26, 2024

EUROFORGE 2024

Transvalor is taking part in the EUROFORGE conFAIR 2024 at the Milano Convention Center in Milan, Italy, on October 22-23, 2024.

Published on Mar 25, 2024

GLASSTEC 2024

Transvalor will attend the International Trade Fair for Glass Production, Processing and Products from 22 to 25 October 2024 in Düsseldorf, Germany.

Published on Mar 20, 2024

International Conference on Aluminum Alloys ICAA 19

Transvalor is participating in the International Conference on Aluminum Alloys in Antlanta, USA from June 23rd to 37th, 2024,

Published on Mar 20, 2024

CastForge 2024

Transvalor will participate in the Trade Fair for Castings and Forgings with Processing (CastForge) in Stuttgart, Germany from 4 to 6 June.

Published on Mar 19, 2024

ESAFORM 2024

Transvalor will attend the 27th International ESAFORM Conference on Material Forming in Toulouse, France between 24-26th April 2024.

Published on Mar 15, 2024

Case study Anchor - Design of bend tooling

Anchor Harvey utilized FORGE® for the design of bend tooling into a U shape that aligns with the desired specifications.

Published on Mar 4, 2024

National research projects

Transvalor is frequently involved in national research projects that bring together numerous industrial participants.

Published on Feb 16, 2024

AEROSPACE SYMPOSIUM

Transvalor will participate in the 4th Aerospace Symposium on 13th and 14th March 2024 in Frankenthal, Germany.

Published on Feb 8, 2024

TISD 2024 - Transvalor International Simulation Days

The Transvalor International Simulation Days 2024 and Transvalor 40th Anniversary for industrial and academic world interested in the simulation of material forming processes is plan from September 30th to October 2nd

Published on Feb 7, 2024

ECHT 2024 - CONFERENCE ON HEAT TREATMENT & SURFACE ENGINEERING

Transvalor will be participating in the European Conference on Heat Treatment and Surface Engineering ECHT 2024 from June 5th to 7th in Toulouse, France.

Published on Feb 7, 2024

IFM 2024 - International Forgemasters Meeting

Transvalor will take part in the International Forgemasters Meeting IFM 2024 in Milan, Italy from May 27th to 29th, 2024.

Published on Feb 7, 2024

TPMS-5 - International Conference on Thermal Process Modeling and Simulation

Transvalor will attend the International Conference on Thermal Process Modeling and Simulation (TPMS-5) in Lecce, Italy, from April 17 to 19, 2024.

Published on Feb 6, 2024

EPHJ 2024 - THE PINNACLE EVENT FOR THE FINE WATCHMAKING INDUSTRY

Transvalor is participating in the EPHJ 2024 trade show for watchmaking from the 11th - 14th of June in Geneva, Switzerland.

Published on Jan 19, 2024

Z-set: new paper in Sciencedirect.com

Exciting developments in hydrogen embrittlement modeling!

Published on Nov 14, 2023

Upcoming REM3D® webinar

The opportunity to learn more about how to use advanced simulation with REM3D® and ask questions to our Experts.

Published on Nov 10, 2023

STELLANTIS and TRANSVALOR unveil the future of automotive foundry: THERCAST® changes the game

Stellantis, a global leader in the automotive sector, has selected Transvalor's THERCAST® software for its forging and casting processes.

Published on Nov 7, 2023

Don't Miss the Transvalor European Casting Forum 2024!

The 1st edition of the Transvalor European Casting Forum takes place in Taranto, Italy, on the 6th and 7th of February 2024 on the Acciaierie d’Italia premises.

Published on Oct 18, 2023

High Strength Steel 2023

Transvalor will be participating in the High Strength Steel 2023 on October 26-27th, 2023 in Bergamo, Italy.

Published on Oct 12, 2023

FOAM EXPO Europe 2023

Transvalor is participating in the largest free trade fair and conference for technical foam products and manufacturing, from 5 to 7 December in Stuttgart, Germany.

Published on Sep 8, 2023

ICTP 2023

Transvalor will be participating in the ICTP 2023 from September 24th to 29th, 2023.

Published on Sep 5, 2023

Upcoming THERCAST® webinars

The opportunity to learn more about how to use advanced simulation for casting with THERCAST® and ask questions to our Experts.

Published on Aug 31, 2023

Transvalor expands direct presence to Italy: Enhancing customer engagement and support

Transvalor is excited to announce a significant step forward in its commitment to providing exceptional service to its users. We are pleased to introduce the establishment of Transvalor Italy, a direct channel to better serve our valued customers in Italy.

Published on Aug 17, 2023

Strengthening Industry 4.0: Digital Simulation Revolutionizes Polyurethane Foam Manufacturing

The approach developed by TRANSVALOR, utilizing FOAMAT® Systems and the optimization tool TRANSFOAM®, effectively caters to the requirements for both quality and efficiency.

Published on Aug 17, 2023

TRANSWELD® for Friction Welding

TRANSWELD® offers a comprehensive environment for simulating friction welding accurately and efficiently, thus optimizing the process and obtaining high-quality assemblies.

Published on Aug 8, 2023

Induction Heating Optimization: Minimizing Energy Usage While Preserving Part Integrity

In this article, we delve into the world of induction heating, exploring its advantages, simulation capabilities, and how optimization can lead to substantial energy savings.

Published on Aug 4, 2023

Exploring Ingot Casting: Understanding Powder / Liquid Metal Interaction during Pouring

Understanding the intricate interactions between the liquid metal, slag, powders, and other inclusions is vital for ensuring high-quality ingot production.

Published on Jul 19, 2023

Transvalor being featured in the specialized press review Forge et Fonderie

Transvalor is featured in the specialized press review Forge et Fonderie, focusing on the energy control of free forging processes through simulation.

Published on Jul 7, 2023

Stainless Steel World Conference & Exhibition

Transvalor will be present at the 2023 Stainless Steel Conference form 26 to 28 June in Maastricht, The Netherlands.

Published on Jun 6, 2023

Automatic Anisotropic Mesh adaptation for Electromagnetic Processing of Materials

Towards a seamless and accurate simulation framework for electromagnetic processing of materials (EPM).

Published on Jun 2, 2023

GIFA | METEC 2023: International foundry exhibition

Transvalor is participating in the international foundry trade fair GIFA | METEC 2023 from 12 to 16 June in Düsseldorf, Germany.

Published on Jun 2, 2023

A3TS: 49TH CONGRESS ON HEAT TREATMENTS AND SURFACE TREATMENTS

Transvalor will be present at the 49th congress on heat treatments and surface treatments form 5 to 7 July in Mulhouse, France.

Published on May 25, 2023

FORGE® for flow forming

FORGE® can address the simulation of flow forming process, dedicated to manufacture parts of revolution.

Published on May 25, 2023

Maximizing Manufacturing Efficiency with Forging Simulation Software

In the competitive world of manufacturing, companies are always on the lookout for ways to increase efficiency, reduce costs, and improve product quality.

Published on May 23, 2023

EPHJ 2023: The Must-Attend Event for the Fine Watchmaking Industry

Transvalor participate in the EPHJ 2023 trade show for watchmaking on June 6-9 in Geneva, Switzerland.

Published on May 16, 2023

FORGE FAIR 2023 - Cleveland, USA

Transvalor will attend the Forge Fair 2023 in Cleveland (Ohio, USA) from May 23rd to 25th.

Published on May 11, 2023

The I-Weld project

How to improve weld control in the energy sector through the prediction of interactions between ultrasonic waves and grains?

Published on Apr 7, 2023

ECHT 2023 - Conference on heat treatment & surface engineering

Transvalor will attend the ECHT, European Conference on Heat Treatment, on 29-31 May in Genova, Italy.

Published on Mar 31, 2023

TRANSVALOR TECH DAYS 2023: A unique opportunity to optimize your production processes

Discover Transvalor's solutions that will allow you to overcome your industrial challenges and facilitate your daily life.

Published on Mar 31, 2023

MADE IN STEEL 2023 - CONFERENCE & EXHIBITION FOR THE STEEL INDUSTRY

Transvalor will participate in the international conference and exhibition Made In Steel from 9 to 11 May 2023 in fieramilano Rho (Milan, Italy).

Published on Mar 20, 2023

SIA DIGITAL SIMULATION 2023 - Congress and exhibition

Transvalor participates in the SIMULATION NUMERIQUE 2023 congress organized by the French Society of Automotive Engineers (SIA) which will take place on April 5-6 at the Gustave Eiffel University in Paris.

Published on Mar 7, 2023

MECSPE 2023 - Conference and Trade Fair for the manufacturing industry

Transvalor will be part of the 21th edition of MECSPE trade fair in Milan organized by Senaf on the 29, 30 and 31th of March 2023.

Published on Feb 13, 2023

Upcoming FORGE® NxT 4.0 webinars

Learn more about the new version of the FORGE® family through a series of live webinars.

Published on Jan 24, 2023

What’s new in the version NxT 4.0?

TRANSVALOR is proud to announce the latest version of FORGE®, COLDFORM® and SIMHEAT®.

Published on Nov 18, 2022

Quaker Houghton event: Sustainable Solutions for Heat Treatment

Transvalor will attend the "Sustainable Solutions for Heat Treatment" event organized by Quaker Houghton which will be held in Bilbao (Spain) on November 24th, 2022

Published on Aug 16, 2022

Tech Days 2022 - Manufacturing process simulation days

Transvalor's user meetings 2022: let's meet!

Published on May 9, 2022

EUROFORGE 2022 - Conference and Trade Fair

Transvalor will be participating as Platinum Sponsor at EUROFORGE ConFAIR, held in Bilbao, Spain, on September 28-29, 2022 at Euskalduna Conference Center.

Published on May 4, 2022

EPHJ 2022 - Fine Watchmaking Exhibition

Transvalor took part in the EPHJ 2022 trade show for watchmaking from the 14th - 17th of June in Geneva, Switzerland.

Published on May 3, 2022

EUROGUSS 2022 - International Trade Fair for Die Casting

Transvalor participated again in EUROGUSS, the international International Trade Fair for Die Casting, from June 08 to 10, 2022 in Nuremberg, Germany.

Published on Apr 25, 2022

ECHT 2022 - Conference on heat treatment

Transvalor will attend the ECHT, european conference on heat treatment, which will be held in Salzburg (Austria) from September 5 to 8, 2022.

Published on Apr 14, 2022

Webinar - How can simulation help to predict and improve the final properties of heated components?

Discover how simulation software can help you to predict and improve final properties of heated components !

Published on Mar 28, 2022

ForTech Bulk 2022 - Forming Technology Network Bulk

Transvalor will participate to the Hybrid conference ForTech Bulk 2022 in Stuttgart from 18th to 19th May 2022.

Published on Mar 24, 2022

Transvalor European Microstructure Simulation Days 2022

Transvalor has organized an international 2 days event on March 23- 24, 2022 in Frankfurt, Germany about microstructure prediction.

Published on Mar 22, 2022

Research collaboration in Artificial Intelligence

Transvalor and CentraleSupélec sign a research agreement in Artificial Intelligence.

Published on Mar 17, 2022

Transvalor Webinars

In our webinars you will receive answers on how the simulation software can answer current industry or process-specific challenges.

Published on Feb 28, 2022

NeMMo 2022 - New Materials for Future Mobility

Transvalor will attend NeMMo - New Materials for Furture Mobility, 6-7 July 2022 in Nantes (France).

Published on Jan 20, 2022

Simulation of electromagnetic stirring with THERCAST®

It is possible to simulate electromagnetic stirring with THERCAST® for continuous casting, ingot casting and foundry processes.

Published on Jan 11, 2022

COLDFORM® for fasteners

COLDFORM® simulates all the stages for the manufacturing of fasteners: bar shearing, forging sequence, thread rolling, heat treatment, etc.

Published on Jan 5, 2022

German Cold Forming Days 2022

Transvalor participates in the 36th annual meeting of cold forming industries, organized from February 23-24, 2022 in Düsseldorf, Germany.

Published on Nov 30, 2021

Automatic optimization of forging processes

The automatic optimization with FORGE®, applied to a forging process, aims at reducing production costs and improving the quality of the manufactured part.

Published on Nov 18, 2021

THERCAST® for shell mold gravity casting

The software THERCAST® allows to simulate the foundry processes such as shell mold gravity casting.

Published on Nov 5, 2021

Parallel computing for high-performance simulations

FORGE® is based on the parallel computing that allows to reduce computation times by dividing the computation domain across several processors.

Published on Nov 3, 2021

How simulation helps to increase die life in tooling

Wear, mechanical and thermal fatigue, crack, plastic deformation... FEM software can help perform preventive maintenance and optimize tool geometry.

Published on Oct 29, 2021

New strategy for the initiation and propagation of real cracks

Our recent work allowed the improvement of FORGE®'s model for the simulation of cracks related to cutting processes.

Published on Oct 22, 2021

ECCC 2021 - Continuous Casting Conference

Transvalor attended the ECCC 2021, the European Conference on Continuous Casting held in Bari, Italy from 20 until 22 October 2021.

Published on Oct 15, 2021

TISD 2021 - Transvalor International Simulation Days - online

The Transvalor International Simulation Days, dedicated to material forming simulation were organized online in October from 12th - 15th, 2021.

Published on Sep 30, 2021

Development of error estimators for electromagnetic treatment of materials

An error estimator is being developed to allow the automatic mesh refinement during electromagnetic treatment simulations.

Published on Sep 22, 2021

Heat Treatment Congress Spain 2021

Transvalor took part in the Heat Treatment Congress, a day dedicated to heat treatment applications held in Bilbao (Spain) on September 22, 2021.

Published on Sep 17, 2021

EPHJ 2021 - Fine Watchmaking Exhibition

Transvalor took part in the EPHJ 2021 trade show for watchmaking from 14th - 17th September in Geneva, Switzerland.

Published on Jul 16, 2021

Our professional associations partners

Since its creation, Transvalor has relied on a network of professional associations partners for the greatest benefit of its products and services.

Published on Jun 24, 2021

Webinar - Novelties in simulation of heat treatment processes

Discover SIMHEAT® latest functionalities to predict phase transformations, hardness, tensile strength and residual stresses and microstructure evolution.

Published on Jun 24, 2021

ICTP 2021 - International Conference on the Technology of Plasticity

ICTP 2021 takes place online from July 25 - 30, 2021 and Transvalor won't miss this event for metal forming scientists.

Published on Jun 3, 2021

Webinar - Improve fasteners quality and durability using simulation

Discover how a simulation software can help to master your process and increase your profitability, for the manufacturing of fasteners.

Published on Jun 3, 2021

STEELSIM 2021 - Simulation of Metallurgical Processes in Steelmaking

Transvalor will be participating in this international conference, held in Octobre 04th - 07th, 2021 in Vienna, Austria.

Published on May 17, 2021

Webinar - TRANSWELD®, the simulation software for welding operations

Discover how simulation software can help to guarantee the quality of your bead and anticipate numerically potentials welding defects.

Published on May 12, 2021

MESSIAH Chair - hydrogen and energy transport facilities

Transvalor is involved in the MESSIAH Chair project, which aims to understand the effect of hydrogen on energy transport facilities.

Published on May 6, 2021

THERCAST® for high-pressure die casting (HPDC)

THERCAST® simulates all stages of the HPDC process and considers metal flow, shrinkage, defects, cycle times, molds, metallurgical changes, etc.

Published on Apr 22, 2021

Aluminum heat treatment simulation with SIMHEAT®

SIMHEAT® simulates the solutionizing, quenching and artificial ageing phases of aluminum alloys thanks to the QFA and the Shercliff-Ashby models.

Published on Apr 15, 2021

Webinar - Optimize HPDC & LPDC in the automotive industry with THERCAST®

Discover how to get zero-defects parts and optimize each phase of your process with THERCAST® simulation software.

Published on Apr 8, 2021

Predict the Zener Pinning phenomenon with DIGIMU®

DIGIMU® predicts microstructural evolutions occurring during thermomechanical processes using physically based leading-edge models.

Published on Apr 6, 2021

New method for reducing continuous casting simulation computation times

A new 'global slice computation' method has been developed in THERCATS® to drastically reduce computation time for continuous casting simulation.

Published on Apr 6, 2021

THERCAST® for low pressure die casting (LPDC)

THERCAST® simulates all phases of the low pressure die casting process and predicts defects, shrinkage, metallurgical changes, tooling analysis, etc.

Published on Mar 17, 2021

Simulation of spray quenching with SIMHEAT®

Discover SIMHEAT® software capabilities to simulate and optimize your spray quenching process: process parameters, distorsion, phase transformation, etc.

Published on Mar 16, 2021

Orthomanufacture 2021

From April 28 to 29, 2021 the orthopedic implants sector will meet and Transvalor will contribute its expertise during this online edition of the congress.

Published on Mar 15, 2021

Colloquium SFIP Polymer Materials 2021

Transvalor will participate in the colloquium on polymer materials in the field of sports, which will take place through different webinars in March 2021.

Published on Feb 26, 2021

Simulation of quenching with SIMHEAT®

Discover SIMHEAT® software capabilities to simulate and optimize your quenching process: control metallurgical properties, avoid defects and distortions...

Published on Feb 25, 2021

Webinar - Discover Transvalor's solutions for the metal industry

Learn more about simulation solutions to optimize your complete manufacturing process: from continuous casting or ingot casting to forging.

Published on Feb 16, 2021

How to avoid closed die forging defects?

Find out how simulation allows to anticipate and avoid defects on your forged parts: underfilling, folds, cracks, piping defects, improper grain flow, etc.

Published on Feb 4, 2021

Webinar - Advantages of Transvalor’s newest commercial offers

Learn how you can use and combine the software with new, flexible offers in such a way that it is most economical and productive for your company.

Published on Jan 21, 2021

Webinar - Manage inclusions for metal cleanliness in die casting

Understand how to track and better anticipate inclusions for an improved metal cleanliness, thanks to a simulation software dedicated to foundry processes.

Published on Jan 20, 2021

Testimonials FORGE®

See what our users have to say about FORGE® software, its capabilities and its innovative features.

Published on Jan 11, 2021

Ergonomic features of the new THERCAST® NxT 2.1 interface

Discover the new features of the THERCAST® user interface: context menu, Drag & Drop function, customizable keyboard shortcuts, etc.

Published on Jan 11, 2021

New functionalities of the version THERCAST® NxT 2.1

The new THERCAST®NxT 2.1 version has many ergonomic functionalities and allows to work with more efficiency.

Published on Jan 8, 2021

FORGE® Hot Metal Forming ESSENTIAL module

Discover FORGE® Hot Metal Forming ESSENTIAL, suitable for most standard hot forming processes and especially dedicated to closed-die forging.

Published on Jan 8, 2021

FORGE® Hot Metal Forming PREMIUM module

FORGE® Hot Metal Forming PREMIUM gives access to all the functionalities and attractive features related to hot forming processes.

Published on Jan 8, 2021

FORGE® Ring Rolling module

Discover FORGE® Ring Rolling, designed for those who want to simulate ring rolling processes and benefit from an attractive package to increase computing power.

Published on Jan 8, 2021

COLDFORM®

COLDFORM® is dedicated to cold forming processes. Its functionalities cover a wide range of processes such as cold heading, stamping and fine blanking

Published on Jan 8, 2021

SIMHEAT®

SIMHEAT® is devoted to simulating heat treatment processes of metallic alloys including carbon steels, titanium and aluminum alloys.

Published on Jan 8, 2021

FORGE® ALL-INCLUSIVE

FORGE® ALL-INCLUSIVE is the most complete offer that gives access to ALL features and ALL functionalities included in FORGE® software without restrictions.

Published on Jan 8, 2021

THERCAST® Foundry & Ingot Casting PREMIUM module

This module gives access to all features of the ESSENTIAL module + capabilities to perform fully coupled thermal-mechanical and metallurgical analysis.

Published on Jan 8, 2021

THERCAST® ALL-INCLUSIVE

THERCAST® is available in an ALL-INCLUSIVE version including all the existing processes and features for simulating metal casting and solidification.

Published on Jan 8, 2021

THERCAST® Continuous Casting module

This module allows you to outperform your competitors thanks to smart technological innovations for exact analysis of your continuous casting process.

Published on Jan 8, 2021

THERCAST® Foundry & Ingot Casting ESSENTIAL

This module provides a solution for controlling your manufacturing process, developing innovative or complex cast products and reducing time to market.

Published on Jan 4, 2021

Customize your legends in FORGE®

You can customize your legends in the latest version of FORGE® software: change the colors, number of levels, intervals, etc.

Published on Jan 1, 2021

New functionalities of the version FORGE® NxT 3.2

Explore FORGE® NxT 3.2 new ergonomic features to understand how to work with more efficiency and customize your user interface.

Published on Dec 22, 2020

TRANSWELD® for resistance spot welding

TRANSWELD® simulates the resistance spot welding process to predict metallurgical changes, stresses and distortions and to define optimal parameters.

Published on Dec 21, 2020

TRANSWELD® for laser beam welding

TRANSWELD® enables to simulate the laser beam welding process in order to predict metallurgical transformations, residual stresses, and much more.

Published on Dec 14, 2020

Carats - in the service of fashion and luxury

CARATS provides support for businesses seeking to develop a response to the scientific and industrial challenges facing the Fashion and Luxury sector.

Published on Dec 9, 2020

Webinar - What's new in THERCAST® NxT 2.1

Learn what's new in our simulation software for metal casting and solidification, THERCAST® NxT 2.1. and understand the benefits for foundry professionals.

Published on Dec 8, 2020

Webinar - Discovery of FORGE® new ergonomic features

Explore the new ergonomic features of FORGE® software in two webinars and live demos.

Published on Dec 2, 2020

ECHT 2020 - European Conference on Heat Treatment

Transvalor attended ECHT 2020, conference on heat trea.tment, hold from 30 of November to 02 of December.

Published on Nov 26, 2020

Regional Conference NAFEMS France 2020 - Numerical Simulation

On November 25 and 26, 2020, Transvalor has been participated in the online conference on Numerical Simulation organized by the NAFEMS association.

Published on Nov 9, 2020

TRANSWELD® for MIG MAG arc welding

TRANSWELD® simulates MIG MAG arc welding and predicts thermomechanical behavior of an assembly to anticipate residual stresses, distortions, control HAZ, etc.

Published on Oct 29, 2020

REM3D® for PU foam injection and molding process

PU foam injection molding process can be simulated with REM3D®, allowing to predict final properties of your plastic components.

Published on Oct 21, 2020

FORGE® for long and flat products rolling

FORGE® allows to simulate rolling process for long products and provides accurate prediction of shape, temperature, strain evolution, deformation...

Published on Oct 20, 2020

Interoperability of TRANSWELD® with CAE software

Transvalor participated to the VMAP project to improve the interoperability of its software with other computation software, in particular for TRANSWELD®.

Published on Oct 1, 2020

Joining in Car Body Engineering 2020 - virtual conference

Transvalor recorded an on-demand video for the online conference Joining in Car Body Engineering held on September 29 to October 1st, 2020.

Published on Sep 24, 2020

COLDFORM® for mechanical joining

COLDFORM® software allows the simulation of mechanical joining processes such as clinching or riveting and predict mechanical properties of the final part.

Published on Sep 21, 2020

Simulate foundry filters with THERCAST®

Foundry filters can be taken into account in THERCAST® to improve the predictive nature of your casting simulations.

Published on Sep 16, 2020

Case study Tubacex - compare two manufacturing routes

Tubacex used FORGE® and THERCAST® to compare the quality of two manufacturing routes (forging or blooming) to produce round bars with a new ingot design.

Published on Sep 15, 2020

FORGE® for electrical upsetting

FORGE® software makes it possible to simulate electrical upsetting and predict thermal, electrical, kinematics data, shape of the preform and more.

Published on Sep 9, 2020

Tech Day France 2020

Transvalor organized a Tech Day in Metz, France on 9 Sept. 2020 to present the benefits of its solutions for the forging and the casting industries.

Published on Sep 8, 2020

New release of DIGIMU® 4.0 for microstructural evolution simulation

A new version of DIGIMU®, software dedicated to the simulation of microstructural evolution, has been released by Transvalor.

Published on Aug 27, 2020

Customer Story - LISI AEROSPACE

LISI Aerospace, designer and manufacturer of fasteners has been working with FORGE® software since 10 years to accelerate its development.

Published on Aug 17, 2020

Customer Story - GMH Gruppe

Georgsmarienhütte GmbH (GMH gruppe), leading supplier of steel bars uses THERCAST® software to optimize its casting processes.

Published on Aug 4, 2020

Customer Story - Alcorta Forging Group

Since a few years, Transvalor supports Alcorta Forging Group in the research of innovative solutions.

Published on Jul 23, 2020

Customer Story - Faurecia Automotive Seating

Faurecia, manufacturer of automotive seat mechanisms, uses our FORGE® and TRANSWELD® software to ensure the safety of automobilists.

Published on Jul 16, 2020

Customer Story - NTN-SNR

NTN SNR, manufacturer of mecanical bearings for the automotive and aerospace industry, use the software FORGE® to optimize its processes.

Published on Jul 9, 2020

Ergonomic features of the new FORGE® interface

Discover the new features of the FORGE® user interface: context menu, Drag & Drop function, customizable keyboard shortcuts, etc.

Published on Jul 6, 2020

New functionnalities of the version FORGE® NxT 3.1

This new version FORGE® NxT 3.1 brings many new features in ergonomics and still enables your to work more efficiently.

Published on Jul 6, 2020

Generate its own user routines in FORGE®

FORGE® simulation software makes it possible to code your own behavior, damage, fatigue or friction laws and many others.

Published on Jul 2, 2020

Transvalor joins the AFRC as the first Tier One Partner

Transvalor becomes Tier One Partner of the AFRC and brings simulation solutions to the FutureForge facility, to strengthen projects on metal forming.

Published on Jul 1, 2020

Customer Story - Leiber Group

Leiber Group, specialist in light aluminum components, has chosen FORGE® simulation software to improve its industrial processes.

Published on Jun 17, 2020

Customer Story - TU Dortmund

The IUL TU Dortmund uses FORGE® software to develop its research in adiabatic blanking, hot shear cutting and hot sheet forming.

Published on Jun 17, 2020

Tech Days - Webinars to improve process simulation

Transvalor & AFRC organize a series of free webinars for the manufacturing industry on June 17-18, 2020. They are open to any english-speaking participant.

Published on Jun 8, 2020

Customer Story - Advanced Forming Research Centre (AFRC)

The Advanced Forming Research Centre use FORGE® and DIGIMU® to support them in the microstructural modeling.

Published on Jun 2, 2020

The 'One Click Sharing' service is no longer available

This service is no longer available.

Published on Jun 2, 2020

Improvement of the damage-to-fracture transition model

A new modeling method for damage-to-fracture has been introduced into FORGE® and COLDFORM® software.

Published on May 5, 2020

Mastering open mold chemical foaming with REM3D®

REM3D®, simulation software for plastic injection processes, integrates models dedicated to open mold foaming.

Published on May 5, 2020

Simulate the laser welding process with TRANSWELD®

TRANSWELD® simulation software integrates models dedicated to welding without added material, including laser welding.

Published on May 4, 2020

Quaker Houghton: new strategic and technological partner

Transvalor and Quaker Houghton have formalized their strategic and technological partnership solidifying several joint actions initiated almost 3 years ago.

Published on May 1, 2020

COLDFORM® for thread rolling

COLDFORM® is the best simulation tool for the definition of the entire production of high technology screws, from forging up to thread rolling.

Published on May 1, 2020

SIMHEAT® for induction heating

Discover SIMHEAT® simulation capabilities to analyze and optimize your induction heating process.

Published on Apr 23, 2020

Improvement of the induction model for heat treatments

A doctoral student works with our Scientific Development team on the induction model and more particularly on the adaptation of the meshing.

Published on Apr 16, 2020

New functionalities in THERCAST® NxT 2.0

Discover the new features of THERCAST®, software for simulating foundry applications, ingot casting and continuous casting.

Published on Apr 7, 2020

New version of THERCAST® NxT 2.0 for the foundry sector

A new release of our simulation software dedicated to the foundry sector is now available.

Published on Mar 18, 2020

Covid-19 information

Important informtaion : we remain operational during the Coronavirus crisis.

Published on Mar 17, 2020

EVENT POSTPONED - Colloquium on Metal Forming 2020

POSTPONED EVENT - Transvalor takes part in the Colloquium on Metal Forming organized by the Chair of Metal Forming, 21 to 25 March in Zauchensee, Austria.

Published on Mar 11, 2020

Tech Day Spain 2020

Transvalor organized a Spanish Tech Day to introduce its users to the latest FORGE® and THERCAST® functionalities, as well as the trends in the forge and foundry market.

Published on Jan 31, 2020

GDR Recrystallization Workshop

Transvalor will be taking part in the recrystallization and grain growth Workshop organized at Les Houches, France, from 27 to 31 January 2020.

Published on Jan 15, 2020

Guarantee quality manufacturing and at the best price

How can simulation help the manufacturing of high quality components while ensuring the control of production costs?

Published on Jan 15, 2020

Conquer new markets

How does simulation help to conquer new markets and contribute to the growth of your business? Let’s discover a few concrete examples from customer experiences.

Published on Jan 15, 2020

Gain competitiveness and improve my ROI

How to be more competitive on the industrial scene? Let’s discover a series of concrete examples from customer experiences.

Published on Jan 15, 2020

Our strategic and technological partners

Transvalor relies on a network of technology partners to incorporate the latest innovations in its products and services.

Published on Dec 10, 2019

Improvement of radiation heat transfer calculation

Radiation results are more accurate in THERCAST® software thanks to recent improvements.

Published on Nov 29, 2019

New model for polyurethane foams behavior

Un nouveau modèle a été développé dans notre logiciel REM3D® pour améliorer la modélisation du comportement des mousses polyuréthanes.

Published on Nov 27, 2019

Polymer Foam 2019

Transvalor took part in Polymer Foam 2019, from 26 to 27 November in Germany.

Published on Nov 7, 2019

Datadvance User Conference 2019

Transvalor was sponsor of Datadvance User Conference, Nov. 6-7, at CentraleSupelec, Paris area, France.

Published on Oct 17, 2019

TISD 2019 - Transvalor International Simulation Days

The Transvalor International Simulation Days 2019 was for industrial and academic world interested in the simulation of material forming processes.

Published on Sep 19, 2019

ICFG 2019

Transvalor participated in ICFG 2019 from September 15th to 19th in Spain.

Published on Aug 15, 2019

STEELSIM 2019

Transvalor took part in STEELSIM, an international conference focused on the modeling and simulation of metallurgical processes, in Toronto (Canada)

Published on Aug 1, 2019

Transvalor Customer portal

A brand new customer portal is now available.

Published on Aug 1, 2019

THERCAST® - Precision above all

Avoid surprises by modeling your casting process with unprecedented accuracy

Published on Jul 15, 2019

THERCAST® - Capabilities

Master the complex relationships between metal, molds and all other elements of your casting process

Published on Jul 15, 2019

THERCAST® performance and scalability

Run simulations faster and more accurately, and run more of them

Published on Jul 10, 2019

THERCAST® - Proven real-world accuracy

Benefit from the unmatched capabilities of THERCAST®

Published on Jun 30, 2019

THERCAST® - Easy setup and exploration

Easily model an existing casting process, or one you’re planning or imagining

Published on Jun 30, 2019

THERCAST® - Deployment

Set up, schedule, run and manage simulations with ease

Published on Jun 21, 2019

EPHJ 2019 - Fine Watchmaking exhibition

Transvalor participated to EPHJ June 18th-21th, 2019 in Palexpo Geneva, Switzerland.

Published on Jun 20, 2019

THERCAST® - Start-to-finish simulation

Simulate your casting process from A to Z, without additional software tools and optimize the manufacturing process chain from casting to forming.

Published on Jun 10, 2019

Testimonials THERCAST®

See what our clients have to say about THERCAST® software.

Published on Jun 7, 2019

ECHT 2019 – European Conference on Heat Treatment

June 5-7, 2019 Transvalor participated in the ECHT (European Conference on Heat Treatment) in Bardolino (Italy).

Published on Jun 3, 2019

Layout of Highly Stressed Injection and Motor Components

The companies Hirschvogel Automotive Group, Engineering Center Steyr and Transvalor have published an article in the journal ATZoffhighway.

Published on May 17, 2019

Case study Ascometal - validate a new ingot design

Ascometal used THERCAST® to validate the dimensioning of a new ingot.

Published on May 16, 2019

THERCAST® for investment casting process

The software THERCAST® allows to simulate the foundry processes such as investment casting.

Published on May 16, 2019

THERCAST® for tilt casting process

The software THERCAST® allows to simulate the foundry processes such as tilt casting.

Published on May 16, 2019

THERCAST® for centrifugal casting

THERCAST® software allows the simulation of centrifugal casting process, taking into account the filling and the solidification phases.

Published on May 16, 2019

THERCAST® for sand casting

The software THERCAST® allows to simulate the foundry processes such as sand casting.

Published on May 15, 2019

NEMU 2019

Transvalor participated to The International Conference NEMU in Stuttgart from 14th to 15th May 2019.

Published on May 15, 2019

How to get to Transvalor?

You are visiting us for a training or any other meeting? Follow our access instructions.

Published on May 10, 2019

Testimonials highlighting our Customer Support & Training

Read our testimonials to see what our clients have to say about our Customer Support and our trainings

Published on May 10, 2019

ESAFORM 2019

Three of our developers held presentations about material forming simulation at ESAFORM 2019, from 08th to 10th May of 2019 in Vitoria-Gasteiz (Spain).

Published on Apr 12, 2019

3D numerical modeling of ductile fracture

Research program in association with CEMEF: 3D numerical modeling of ductile fracture.

Published on Apr 4, 2019

SIA 2019 - International Conference and Exhibition on Numerical Simulation

Transvalor attended at the conference about Numerical Simulation organized by the SIA held on 03-04 April, 2019, St-Quentin en Yvelines, France

Published on Mar 29, 2019

Development of the multidirectional forging process with FORGE®

The Revue Forge & Fonderie published an article about a multidirectional forging studies done by Cetim and IPH. The work has been carried out with FORGE®.

Published on Mar 25, 2019

Testimonials COLDFORM®

See what our clients have to say about COLDFORM® software.

Published on Mar 23, 2019

Case study Felb - simulate the ring rolling process for mass production

Felb Srl used FORGE® to realize a new shaped ring rolling process.

Published on Mar 22, 2019

User Meeting FORGE® Turkey 2019

Transvalor organized its first FORGE® User Meeting from March 19 to 21, 2019 in Istanbul, Turkey.

Published on Mar 12, 2019

FORGE® NxT 3.0 is released

Discover the new functionalities of FORGE® NxT 3.0: improvement of computation time, mesh adaptation, aluminum heat treatment , cutting and shearing, etc.

Published on Mar 11, 2019

New address: Transvalor is moving

Transvalor is moving to a new address in Sophia Antipolis.

Published on Feb 5, 2019

Download our software and Transvalor logos

Download our official logos in different formats to use them on your communication media.

Published on Feb 1, 2019

Legal Disclaimer

Here you will find information about the legal notices of Transvalor.

Published on Feb 1, 2019

Data Protection Policy

Data Protection Policy (GDPR) of the Transvalor website.

Published on Jan 31, 2019

Case study NTN-SNR Roulements - validate the induction hardening

NTN-SNR Roulements used FORGE® to simulate its induction hardening process.

Published on Jan 24, 2019

Optimize the electrical resistance spot welding process

How to optimize the electrical resistance spot welding process in the automotive industry.

Published on Jan 22, 2019

Case study ABS Metallurgical Center - soft reduction in continous casting

ABS Centre Métallurgique used THERCAST® software to set up a study revamping a vertical-curve machine to include soft reduction.

Published on Jan 21, 2019

TEI has chosen FORGE® to simulate its hot forging process

The Turkish company TUSAS Engine Industries Inc. (TEI) has integrated FORGE® to simulate complex manufacturing processes.

Published on Jan 20, 2019

Improving the ingot quality

Improving the ingot quality by understanding the behavior of the mold flux during casting processes using 3D fluid/structure numerical simulation model.

Published on Jan 10, 2019

Case study Boucledor - optimize the stamping process

Boucledor used COLDFORM® to simulate the complete sequence of its stamping process.

Published on Dec 1, 2018

Cookie Management

This article gives you information about the cookie management of the Transvalor website

Published on Nov 15, 2018

Process simulation for fastener manufacturing

Fastener + Fixing Magazine published an article about Transvalor and the benefits of manufacturing process simulation.

Published on Oct 20, 2018

Transvalor Renews its ISO 9001 Certification: A Strengthened Commitment to Excellence and the Future

Transvalor renews its ISO 9001 certification and continues its commitment to excellence

Published on Aug 7, 2018

Leiber Group chooses FORGE® Simulation Software

LEIBER Group GmbH & Co. KG has introduced FORGE® simulation software.

Published on Aug 1, 2018

Testimonials REM3D®

See what our clients have to say about REM3D® software.

Published on Jul 1, 2018

Testimonials DIGIMU®

See what our clients have to say about DIGIMU® software.

Published on Jun 1, 2018

French research projects

Transvalor is naturally often implicated in research projects at the french national level, with numerous large-scale industrial participants.

Published on May 30, 2018

THERCAST® - FAQ

Answers to frequently asked questions about the software THERCAST®.

Published on May 15, 2018

An innovative method for producing balls from scrap rail head

The paper, written by Lublin University in Poland, describes an innovative technological solution for producing balls from scrap rail heads.

Published on May 1, 2018

THERCAST® for ingot casting

The software THERCAST® allows the simulation of ingot casting processes.

Published on May 1, 2018

THERCAST® for continuous casting

The software THERCAST® allows the simulation of continuous casting processes.

Published on May 1, 2018

FORGE® for open-die forging

FORGE® addresses major open-die forging processes: cogging, becking, mandrel drawing, blooming, etc. serving the energy industry and other industries.

Published on May 1, 2018

FORGE® for orbital forging

FORGE® simulates orbital forging and permits validation and optimization of forging sequences to improve forging yield and the parts’ quality.

Published on May 1, 2018

FORGE® for hydroforming

FORGE® allows the simulation of hydroforming, a process dedicated to manufacturing thin products, plates or tubes.

Published on May 1, 2018

FORGE® for closed-die forging

FORGE® software simulates closed-die forging process and provides a fast and accurate insight into forged components.

Published on May 1, 2018

FORGE® for superplastic forming

FORGE® addresses regular superplastic forming as well was superplastic forming combined with diffusion bonding.

Published on May 1, 2018

FORGE® for Shape Rolling

Shape rolling is used to produce preforms for components such as connecting rods or crankshafts. FORGE® makes it possible to simulate this process.

Published on May 1, 2018

FORGE® for glass forming

FORGE® can simulate two processes of glass forming: blow-blow process and press-blow process.

Published on May 1, 2018

FORGE® for machining

The FORGE® software can be used to simulate machining.

Published on May 1, 2018

FORGE® for Cross-Wedge Rolling

FORGE® can simulate cross wedge rolling and skew rolling, and predict final shape of the preform, defects, microstructure, stresses, strain, etc.

Published on May 1, 2018

FORGE® for sheet metal forming

FORGE® simulates sheet metal forming and predict the final shape and thickness, defects like striction, residual stresses, press loads, metallurgy, etc.

Published on May 1, 2018

FORGE® for heat treatment

FORGE® simulates heat treatment processes such as induction heating, carburizing, case hardening, quenching, austenizing, solutioning, annealing, cooling..

Published on May 1, 2018

FORGE® for bending processes

FORGE® allows the simulation of bending processes and predicts phase changes, temperature, thickness evolution, stresses, kinematics of the tooling, etc.

Published on May 1, 2018

FORGE® for trimming and fine blanking processes

Cutting processes occur at different stages of the workflow.

Published on May 1, 2018

FORGE® for ring rolling

FORGE® simulates ring rolling processes and predicts the ring geometry, defects, microstructure, efforts and torques, temperature, strain, stresses, etc.

Published on May 1, 2018

THERCAST® for foundry casting

The software THERCAST® allows to simulate the foundry processes such as sand, shell, low and pressure casting, tilted casting, etc.

Published on Jan 31, 2018

Physical modeling of polycrystalline evolutions

The microstructural state of a metallic material plays a major role.

Published on Jan 25, 2018

Improving cold forming processes using FEM simulation

The cold forging technique is a difficult process. It requires a good mastery of the process to give the expected output.

Published on Jan 20, 2018

Compaction in the shaping of semi-crystalline polymers

When crystallizing thermoplastics occurs a material shrinkage.

Published on Jan 15, 2018

Injection and foam molding

PU foams are widely used in several sectors. REM3D® software is used to finely simulate the injection and foam molding process.

Published on Jan 5, 2018

Prediction of grain size evolution during thermal treatments

Prediction of grain size evolution during thermal treatments at the mesoscopic scale: numerical improvements and industrial examples.

Published on Jan 5, 2018

Forming Process Simulation for Manufacturing Optimization

The grain size of the austenitic stainless steel is an important issue for parts such as primary pipes in nuclear power plants and more for metal forming.

Published on Oct 9, 2017

Benefits of simulation for heat treatment and microstructure prediction

This article aims at promoting process simulation in the forging industry by presenting the newest opportunities available.

❮

❯